High Performance Internet and Wireless Access
The CODA-5719 has the capability to receive 5 Gbps bi-directional based on 2 OFDM + 32 QAM downstream channels and with 2 OFDMA + 8 upstream channels over its DOCSIS 3.1 interface. The integrated WiFi 4×4 2.4GHz 802.11ax and 4×4 5GHz 802.11ax dual band MU-MIMO access point significantly improves the customer experience, extending the WiFi range and coverage with blazing fast speeds. For wired clients, the 2.5 Gbps Ethernet port plus two GigE ports offer ultra-fast connection. It can be paired with Hitron extenders/mesh pods for extra coverage.
Software-switchable Frequency
Upgrade to the high-split (5-204MHz) return path to meet the increased upstream bandwidth demands of video conferencing, IoT and interactive services. Further, since you can change this feature remotely, you have eliminated the need to swap out hardware or send out a technician.
Secure Wireless Networking Controlled at the Tip of your FIngers
The CODA-5719 supports pre-configured and pre-enabled WiFi security via WiFi Protected Setup (WPS), allowing the end user to rapidly setup a secure wireless network without manual configuration. Hitron’s AutoSync software provides secure, automated setup of extenders in the customer’s home or business.
It comes with MyHitron (end user management mobile application). Service Providers can also enjoy additional management and analytics via the HitronCloud/OptiMy CSR interface from the support center.
Key Specifications
- DOCSIS 3.1 2×2 multi-carrier OFDM
- DOCSIS 3.0 32×8 channel bonding
- 4×4 2.4GHz 802.11ax and 4×4 5GHz 802.11ax dual band concurrent MU-MIMO internal antennas
- Extensive operator control via configuration file and SNMP
- Integrated DLNA Media Server with support for video, audio and image serving
- IPv6 routing
- TR-069 and HNAP for easy setup and remote management
- Enhanced management and stability for low total cost of ownership
- One 2.5 Gbps and two GigE Ethernet ports
- Hitron Ecosystem Support (OptiMy, HitronCloud, MyHitron)
- 2 HD voice ports with SIP or MGCP
Learn More about Cable Modems & Routers
The Difference Between a Modem and a Router
Wondering about router vs modem? A modem connects your home to the Internet by translating your ISP’s signal into usable data. A router takes that data and distributes it to your devices over WiFi or Ethernet. You need both for a complete home network setup. ...
Cable Modem vs DSL Modem or Fiber
A modem is a device that communicates with your Internet service provider (ISP) to connect you to the Internet. It is something that you can rent from your ISP but you can also buy your own. There are a few different types of modems. It is important to understand the...
What is a Cable Modem & How Does It Work?
A cable modem is a device that connects your home to the Internet using the same coaxial cable lines that deliver cable TV. It receives the Internet signal from your Internet Service Provider (ISP) and converts it into a form your home network can use. If you have...
The Ultimate Cable Modem Upgrade to DOCSIS 3.1 & Wi-Fi 6
When you set up Internet in your home, you get a modem. If you want wireless Internet, you also get a router. Often you get the devices through your Internet service provider (ISP), however, you can buy your own. This page focuses on modems. Modems are the small box...
What’s required to be an approved xfinity modem?
When setting up your home Internet network, you need two things: a modem and a router. Well, you need the router if you want wireless Internet. On its own, a modem can give you wired Internet access. However, the two devices pair well together. A modem and router...