If the MoCA LED on the HT-EM4 is not lit up, or you cannot access the Internet when using the HT-EM4 with an existing MoCA 2.0 device, this is likely an interoperability issue with the driver/firmware on the MoCA 2.0 device. Some older MoCA 2.0 devices may have issues communicating because they are using much older driver/firmware versions. This is mostly seen with older single-channel MoCA 2.0 devices and can be resolved by simply upgrading to a newer driver/firmware. Please contact your MoCA 2.0 device vendor to see if there is a newer driver/firmware available for upgrade.
Select Page
- Home
- Knowledge Base
- HTEM4
- Troubleshooting
- Why is my HT-EM4 not working with some MoCA 2.0 devices?
Why is my HT-EM4 not working with some MoCA 2.0 devices?
Related Articles
- How to update the HTEM4 Firmware
- Why do none of the LEDs turn on the HT-EM4?
- Why can’t I access the internet when connected to the HT-EM4?
- HT-EM4 Doesn’t the pre-existing coaxial cable already have the capability of providing Internet?
- Why is my connection speed so slow when using the HT-EM4?
- After connecting a splitter to my network, the HT-EM4 no longer works. Why?