MoCA 2.5 Coax Port
Reset Button
2.5 Gbps Ethernet Port (WAN Port)
Power Port
Use these ports to connect your computers and other network devices, using Cat 5 or 6 Ethernet cables with RJ45 connectors.
Use the RESET button to reboot or restore your HTEM5 settings.
To REBOOT (or restart) the HTEM5:
1. Insert the end of a paper clip or other small object with a narrow tip into the RESET opening on the back of your HTEM5.
2. Press and hold the Reset button for three or four seconds only to reset the HTEM5. The HTEM5 resets, using your existing settings.
To RESTORE the HTEM5 back to Factory Default Settings:
3. Insert the end of a paper clip or other small object with a narrow tip into the Reset opening of the back of your HTEM5.
4. Press and hold the Reset button for 10 to 15 seconds or more to restore* the HTEM5 back to its factory default settings.
*NOTE: If you restore the HTEM5 to factory default settings, any modified settings cannot be recovered.
To REBOOT (or restart) the HTEM5:
1. Insert the end of a paper clip or other small object with a narrow tip into the RESET opening on the back of your HTEM5.
2. Press and hold the Reset button for three or four seconds only to reset the HTEM5. The HTEM5 resets, using your existing settings.
To RESTORE the HTEM5 back to Factory Default Settings:
3. Insert the end of a paper clip or other small object with a narrow tip into the Reset opening of the back of your HTEM5.
4. Press and hold the Reset button for 10 to 15 seconds or more to restore* the HTEM5 back to its factory default settings.
*NOTE: If you restore the HTEM5 to factory default settings, any modified settings cannot be recovered.
The 2.5 Gigabit WAN-port connects to the wide area network such as Internet from your ISP.
Use the POWER port to connect the included 12v DC power supply that came with your HTEM5.
Warning: To avoid any damage to your HTEM5, only use the power supply included.
Warning: To avoid any damage to your HTEM5, only use the power supply included.