The ability to access Hitron’s CODA GUI requires firmware version 7.3.5.0.1b2 or higher. This firmware is only available from your ISP, since the upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of firmware updates lies with the Service Provider.
Hitron does NOT provide end-users with a direct link to downloadable firmware for cable modems. Instead, firmware updates are handed over to the Service Provider, who test and distribute the firmware to the respective cable modems on their network.
This firmware is currently available for Comcast Xfinity and Charter Spectrum Subscribers.
How to Access the GUI:
What you will need:
- Laptop or computer connected via Ethernet and configured with a STATIC IP set to the 192.168.100.x subnet (see links below)
Steps to Access the GUI:
- Connect and power up the CODA modem
- Connect the Laptop/computer via Ethernet cable to the CODA modem
- From the Laptop/computer, open any browser to go to https://192.168.100.1
- A Status menu displays:
The Status menu contains the following sections:
- System Information
- DOCSIS WAN
- LAN Port Status
Status: System Information
The System Information screen displays general information about your CODA’s hardware, software, and its connection to the Internet.
Status: DOCSIS WAN
Displays both Upstream and Downstream signal parameters, including OFDM Downstream & Upstream Overview, and OFDMA Upstream Overview.
Status: LAN Port Status
Displays LAN port status, speed and Duplex status for each LAN port.