You can use the LEDs to verify status and connections. The following table lists and describes the LED status on the front, bottom panel of the cable modem router.
ARIA3411 WiFi 6E Mesh Router/Extender
ARIA3411 LED Color & Status:
LED COLOR:
Green
Green
White Green
White
White
Cyan
White Cyan
Blue
Blue
Amber
White Red
Red
Red Green Blue
STATUS:
Steady
Slow Blinking
Alternating
Slow Blinking
Steady
Steady
Alternating
Blinking (up to 2 minutes)
Solid (60 seconds)
Steady
Alternating
Steady
Color Cycle
DESCRIPTION:
Powering up.
The system is booting.
The Wi-Fi is enabled and establishing the connection.
The system is ready and waiting to be paired.
The system is ready and active (normal state).
The system is ready and active, but the Wi-Fi is disabled.
Activity detected.
Initial setup and/or software update is in progress.
Initial setup and/or software update is in progress.
WPS connection is being established.
WPS synchronization is successful.
Wireless backhaul signal is weak.
No connection to Wi-Fi modem or router.
Hardware failure.
Factory Reset is in progress.